DTF Glitter Transfers by the metre

Your files must meet the following requirements:

• 300 dpi resolution
• We recommend a minimum line thickness of 2pt/2mm (thinner lines may cause difficulty when peeling off the transfer)
• Upload the files with the exact dimensions you want us to produce. We do not resize files.
• Transparent background
• We recommend your file has good resolution. Pixelated file = pixelated print
• No mirror effect. Send your file exactly how you want it to appear.
• If your file contains only white, no problem; although it won’t be visible in the preview, the machine will detect it. No background is necessary.

DTF Glitter is applied as follows:

• Always place it on flat surfaces. If you iron over a seam or fold, peeling off is likely to fail.
• Set the temperature to 165°, and apply 2 presses without removing the film.
  
  
• Once cooled, carefully remove the film, then apply another pressing to remove moisture and the “plastic” effect from the print.
  
  
• Like regular DTF, DTF Glitter cannot withstand heat well, so we do not recommend washing in a machine with abrasives or above 30 degrees.
  
  
• It is important not to send files where the line thickness is excessively thin (<2mm). This may cause the thinnest parts of white logos not to appear due to printer shrinkage.

Like standard DTF, DTF Glitter can be used on any textile.

• Colors may vary and may not be identical. We recommend working in CMYK with the FOGRA 39 color profile. There will still be variation between what you see on the monitor and real life, but with these settings, what you see and what we produce will be as close as possible.
• We are only responsible for defects or printing errors caused by us and our printers.